Connexion

Forums Vt-Net.org - Vt WebRadio > Général - News des services > Labview with Raspberry pi 3 problem

Braxton

p Posté le 16 mai 2018 à 12h21 profil





Hi,




I have follow all the instruction for connecting the RPI3 with Labview 2014 as mentioned in makerhub website and at the last step as attached picture in which I have to install the labview on the RPI3 the LED which connected on GPIO 7 starts continuously ON even when i connect it on GPIO no.8 all this before uploading the blinking project to the RPI3 .also I changed the GPIO from 7 to 8 in the VI and I got error message that GPIO in RPI2 not supported and same if I select other GPIOs.also why I see in the project RPI2 and NOT RPI3 in the project ?




Please help.




I did not find the right solution from the internet.




References:

https://www.raspberrypi.org/forums/viewtopic.php?f=63&t=213563

Digital advertising agency




Thank






Pour répondre, merci de vous connecter.